Identify reservoir and explain how the washer fluid should be filled to a level between the min and max markers on the side of the reservoir. They can be checked by simply operating them.
Identify high/low level markings on header tank where fitted or radiator filler cap and describe how to top up to correct level.
Identify reservoir, check fluid level is between high/low markings.
Identify dipstick/oil level indicator, describe check of oil level against the minimum/maximum markers.
The ABS warning light would become illuminated on the instrument panel if there is a fault.
Turn on lights (turn ignition if necessary), walk around car and check that the lights are on.
Adjust the rigid part of the restraint so that it is close to the back of your head and level with your eyes or top of your ears.
Tyres should be checked to ensure there are no cuts or bulges. There should be 1.6mm of tread depth across the central ¾ of the breadth of the tyre and around the entire outer circumference. This can be checked with a tyre depth gauge or the depth markers in the tyres themselves.
Recommended pressures can be found In the manufacturer's guide. Use a reliable pressure gauge, check and adjust pressures when tyres are cold, don't forget spare tyre, remember to refit valve caps.
Brakes should be tested as you set off by applying gentle pressure at slow speed. Brakes should not feel spongy or slack and the vehicle should not pull to one side.